ResinLab offers a line of stock and custom thermally conductive adhesives.

Most systems are aluminum oxide filled for applications where electrical isolation is required. Other one and two part systems use aluminum powder fillers for structural applications where dielectric properties are not critical.

For even higher performance, we also offer highly customized boron nitride one part premixed and frozen systems for demanding applications.

  • EP1121-4 Black

    Product Documents

    Highly filled, thixotropic thermally conductive epoxy adhesive. Cures to a soft flexible polymer with a low CTE and shrinkage.

    Mixed Viscosity Pot Life Shore Hardness Mix Ratio Temperature Range
    850,000 cps 40-90 minutes 68-84 D 1/1 volume -40° to 150°C
  • EP1306

    Product Documents

    Aluminum filled, thixotropic thermally conductive structural epoxy adhesive. Not recommended for electrical applications.

    Mixed Viscosity Pot Life Shore Hardness Mix Ratio Temperature Range
    350,000 cps 60-90 minutes 80 D 2/1 volume -40° to 150°C
  • EP1330

    Product Documents

    One part heat cure highly filled, non sag viscosity thermally conductive epoxy adhesive. Cures quickly to a rigid high modulus polymer with a low CTE and shrinkage.

    Mixed Viscosity Pot Life Shore Hardness Mix Ratio Temperature Range
    475,000 cps 6 months at 5°C 90D N/A -40° to 150°C
  • EP1330LV

    Product Documents

    One part heat cure highly filled, medium viscosity thermally conductive epoxy adhesive / encapsulant. Cures quickly to a rigid high modulus polymer with a low CTE and shrinkage.

    Mixed Viscosity Pot Life Shore Hardness Mix Ratio Temperature Range
    250,000 cps 6 months @5C 90 D N/A -40° to 150°C
  • EP950G Gray

    Product Documents

    One part heat cure aluminum filled, non sag viscosity thermally conductive epoxy adhesive. Cures to a rigid high modulus polymer with exceptional impact and shear strength.

    Mixed Viscosity Pot Life Shore Hardness Mix Ratio Temperature Range
    750,000 cps 3 months at 25°C 85 D N/A -40° to 150°C