EP1026 BLACK - B GL

 

 

EP1026 BLACK A GL

Overview

ResinLab EP1026 Black is a two part unfilled epoxy adhesive designed for high speed bonding of metals, ceramics, and most plastics. It cures to a tough semi-rigid material, and is free flowing in viscosity. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was especially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. 1 gal pail.

Specs

1 Or 2 Part:
2 Part
Base Chemistry:
Epoxy
Viscosity Cp:
Part A: 16,000; Mixed: 15,500
Service Temperature:
-40 to 90
Cure Time:
24h @ room temperature
Specific Gravity:
Part A: 1.16; Mixed: 1.14
Flash Point:
252
Dielectric Strength:
410 V/mil
Durometer/Hardness:
85 D
Elongation:
10% to 20% @ break
Mix Ratio:
1:01
Volume Resistivity:
8 x 10^14 ohm-cm
Work Life/Pot Life:
1-60 Minutes

Documents

EP1026 Black TDS
Technical Data Sheet

EP1026 Black A MSDS
Safety Data Sheet

EP1026 Black B MSDS
Safety Data Sheet